RE-USE of PV modules, challenges and opportunities of the circular economy
Renewables are set to form the backbones of our future energy system and among them, photovoltaics (PV) has rapidly become one of the most economic energy generation technology. The price of electricity generated by PV has reached a levelized cost of electricity of 5-10 €c/kWh, leading to a major acceleration of its deployment with over 110 GWp of newly installed capacity in 2019 alone. The cumulative installed PV capacity is now 627 GWp and it is expected to reach over 1 TWp by 2025 as predicted by the IEA PVPS. The PV market is largely dominated by crystalline silicon (c-Si) PV modules representing 95% of the market share, while thin-film modules remain a niche product. The Terawatt Era of PV modules is approaching fast, and it is raising important questions about end-of-life management as 5 million tons of PV waste by 2030 is projected by IRENA. Embracing a circular economic model for this maturing industry brings a major opportunity to make sure that PV becomes one of the most sustainable sources of energy.
In the circular economy approach, re-use and repair actions play an essential role in extending the useful life of PV modules by preventing their early entry into the waste stream. The boom in photovoltaic installations began 15 years ago, which explains the natural emergence of the re-employment market exploiting the first wave of dismantling. PV module re-use is then a nascent industry with companies operating in an unexplored and mostly unregulated area. Industrial and public players in PV and/or waste management have little or no knowledge of its operations.
PV CYCLE and imec/EnergyVille conducted the first exploratory study of the sector, with the final goal to capture the current practices of the re-employment market, to reveal its risks and challenges, to inform the authorities and actors concerned, and to formulate the first recommendations. This study was carried out through interviews with field operators and supplemented by expert opinions on technical and legal rules and recommendations as well as on the economic, environmental and social desirability/feasibility of the sector.
About fifteen companies are active in the PV re-use sector with a market estimated between 500 and 600 MWp / year. The volume traded is very difficult to estimate as neither PV site decommissioning nor PV resell markets are registered.
PV modules represent roughly 40% of the total PV system costs which motivates the re-use business case. However, the continued rapid decrease of PV modules prices (now down to 0.2-0.3 €/Wp) and rapid increase of PV module efficiencies (now in the range of 17 to 21%), raises questions on the economic viability of the sector. Second-hand PV modules with lower performance and lifetime expectations but with higher financial risks are mostly in demand in low-income markets. These include African countries but also certain regions of the Middle East and South-East Asia which seek extreme low-cost PV systems with less quality/aesthetic requirements. A rather small (around 10 MWp) and temporary market still exist in (Western) Europe where feed-in tariff regulations often require “very similar” replacement modules in case of damage. Overall, re-used or repaired PV modules are not competitive for new residential, commercial and utility-scale PV installations in high-income countries or even in developing countries with government incentives to deploy PV.
Currently, PV modules for re-use are mainly sourced from large commercial PV systems (10kWp to MWp) or large scale PV plants (> 1MWp) in Europe, USA and China damaged by severe weather leading to all PV modules being removed though many can be intact. The most cost-effective method is to collect re-usable modules at the decommissioning site with the sorting, visual and electrical testing and documentation directly completed upon removal and even including small repairs of the external electrical components of the modules (cabling, connectors, diodes). Detailed recommendations on the procedures of sorting, visual inspections and simple and advanced electrical testing as well as documentation are developed by imec and bifa in the report. In certain cases, modules are directly transferred to the treatment facility for the above-mentioned procedures for more extensive testing repair but at a higher cost.
“To our view, technical guidelines/standards outlying the sorting and testing steps and, most importantly, setting the technical criteria to qualify modules for re-use are a must to ensure the high quality of re-used modules. It might be worthwhile to consider only PV modules for re-use which still have a power above 70% of their initial value and to exclude PV modules with defects having an even minor concern for safety. The implementation of such requirements, who are currently totally absent, would ensure homogenous product quality and build trust towards clients and the Original Equipment Manufacturers.” – Eszter Voroshazi, R&D manager at imec/EnergyVille.
In principle, preparing PV modules for re-use has no negative environmental implications, hence it is a desirable step as part of the circular economic model for PV. In Europe, the Eco-design requirements imposed on electrical and electronic equipment measuring the CO2 footprint is expected to enter into action for PV modules in the coming years.
“This is very likely to make re-use PV modules more competitive/desirable. An important note is that the environmental feasibility of the second-hand PV modules is at risk if their adequate recycling is not guaranteed after their second life. Thus, the current practice of exporting re-used PV modules to developing countries with insufficient waste regulations is creating a major environmental concern.” – Jan Clyncke, CEO of PV CYCLE.
The re-use of PV modules clearly creates employment opportunities for technically skilled and local workforce both in the decommissioning and the re-installation countries. This should be accompanied by proper training of the workforce, which could lead to the creation of 63 jobs per 1000 tons of electric and electronic waste according to an estimation of the RRE-USE network. It is important to note that to ensure economic viability of the sector especially in high-income countries where PV systems are decommissioned, automation in sorting, testing etc. would be required. Such market growth is not only desirable due to the generation of jobs, it also reduces energy poverty in low-income countries, which indirectly contributes to further economic and social development.
In summary, based on our assessment, photovoltaic modules are by design sustainable products. Under the condition of existing systems well regulated and controlled for their technical inspection, repair and final treatment, re-use can be clearly and socially desirable. The economic viability of the sector is currently achieved in low-income countries as clearly evidenced by the fact that most of the global and European players export to these regions. Re-use of photovoltaic modules in developed countries is currently only viable for niche applications and its adoption will depend on whether / how the CO2 footprint of electronic products are incorporated into the cost of the product.
Overall, the unclear legislation, the lack of control of the WEEE directive, and the nearly complete lack of similar legislation outside the EU raise serious environmental and safety concerns about the re-use of PV modules. At the dawn of the first decommissioning wave of PV systems, followed by an expected rapid rise of the volumes of re-usable PV modules, we ask for a careful assessment of the sector and its adequate regulations in consultation with the relevant global actors.
About PV CYCLE
PV CYCLE BELGIUM vzw/asbl is the Producer scheme for PV modules in Belgium. Founded in 2016 by the industry associations ELOYA, FEE, NELECTRA, PV Vlaanderen and TECHLINK it is a 100% independent, Belgian non-profit organization managing the WEEE compliance for PV manufacturers, importers and distributors in Belgium.
PV CYCLE BELGIUM vzw is the managing organization. All operational, financial and administrative tasks are executed by PV CYCLE ivzw/aisbl, the global compliance and waste management provider. For more information, visit www.pvcycle.be. You can also find PV CYCLE on YouTube, Twitter, LinkedIn and Facebook.
PV CYCLE ivzw/aisbl is a pan-European Extended Producer Responsibility (EPR) scheme, offering dedicated compliance and waste management services for products under WEEE and Battery EPR regulations with a special focus on solar energy systems (photovoltaic (PV) modules). Founded in 2007 by and for the PV industry, PV CYCLE ivzw/aisbl has been founded as a not-for-profit association with an international status. Since 2014, the system is driven by a mandatory and legislative framework, known as the Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU, transposed in 28 laws by each member state of the European Union.
About imec
Imec is a world-leading research and innovation hub in nanoelectronics and digital technologies. The combination of our widely acclaimed leadership in microchip technology and profound software and ICT expertise is what makes us unique. By leveraging our world-class infrastructure and local and global ecosystem of partners across a multitude of industries, we create groundbreaking innovation in application domains such as healthcare, smart cities and mobility, logistics and manufacturing, energy and education.
As a trusted partner for companies, startups and universities we bring together more than 4,000 brilliant minds from almost 100 nationalities. Imec is headquartered in Leuven, Belgium and has distributed R&D groups at a number of Flemish universities, in the Netherlands, Taiwan, USA, and offices in China, India and Japan. In 2019, imec’s revenue (P&L) totalled 640 million euro. Further information on imec can be found at www.imec-int.com.
Imec is a registered trademark for the activities of IMEC International (a legal entity set up under Belgian law as a “stichting van open-baar nut”), imec Belgium (IMEC vzw supported by the Government of Flanders), imec the Netherlands (Stichting IMEC Nederland, part of Holst Centre and OnePlanet, supported by the Dutch Government), imec Taiwan (IMEC Taiwan Co.), imec China (IMEC Microelectronics (Shanghai) Co. Ltd.), imec India (Imec India Private Limited) and imec Florida (IMEC USA nanoelectronics design center).
###
CONTACT
PV CYCLE
Bertrand Lempkowicz
Communication, Marketing & PR Manager
[email protected]
www.pvcycle.org
imec
JADE LIU
Press Communication Officer
T +32 16 28 16 93
[email protected]
www.imec-int.com
Article provided by Bertrand Lempkowicz, Communication, Marketing & PR Manager at PV CYCLE.
